Delphi笔试题目

机械类笔试试题
　　1. Briefly describe what is blanking(cutting), forming, coining and emboss
ing in stamping process.
　　2. What is metal clading?
　　3. What is the purpose of adding glass fiber to thermoplastic material?
　　4. In contrast with metal and thermoplastic material,which has a higher co
efficient of thermal expansion(CTE).
　　5. The most suitable material for a integral hinge design (typical plastic
thickness=0.25 to 0.5mm at hinge)
　　6. Can a bending load makes both compressive and tensile stress in a membe
r?
　　7. What is the design criteria used in plastics catch/snap?
　　8. What is FEA?
　　9. Why is natural frequency important in vibration analysis?
　　10. What is the deflection equation of a cantilever beam fixed at one edge
?
　　EE笔试试题
　　1. Name 3 Vehicle Buses.
　　2. Name 2 possible sources of Electromagnetic interference on Electronics
Circuit ASM.
　　3. Wavelength for 12MHz frequency signal is____
　　4. Name 2 important considerations for car radio performan -ce related to
audio signal processing under multipath condition?
　　5. What is the typical FM receiver RF signal strength to achieve 30dB S/N
for car radio?
　　6. When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the
image frequency?
　　7. For a system with a matched impedance, what is the Reflection Coefficie
nt and SWR?
　　8. Which property of the output capacitor is the primary cause of Low Drop
Out(LDO) regulator loop instability?
　　（1）Equivalent series resistance(ESR)
　　（2）Effective series inductance(ESL)
　　（3）Capacitance value
　　（4）Dielectric material
　　9. The switching regulator is capable of:
　　（1）Higher power conversion efficiency
　　（2）Providing an output voltage that is higher than the input
　　（3）Generating an output boltage oppsite in polarity to the input
　　（4）All of the above
　　10. A linear regulator op Vin(max) = 10v, Vout(min) = 4.8v, Iout(max) = 2.
5mA, Iq(max) = 2.5mA, Ta(max) = 8.5摄氏度，The regulator is available in 3 pac
kages.Each package has the following thermal characteristics:
　　Package Rja（摄氏度/W） Rjc（摄氏度/W）
　　SO14 125 30
　　D1P8 100 52
　　Choose the most suitable package to handle the power dissipation requireme
nt without a heat sink and why.
　　软件笔试题
　　1. How do you code an infinite loop in C?
　　2. Volatile:
　　（1）What does the keyword volatile mean? Give an example
　　（2）Can a parameter be both const and volatile? Give an example
　　（3）Can a pointer be volatile? Give an example
　　3. What are the values of a, b, and c after the following instructions:
　　int a=5, b=7, c;
　　c = a+++b;
　　4. What do the following declarations mean?
　　（1）const int a;
　　（2）int const a;
　　（3）const int *a;
　　（4）int * const a;
　　（5）int const * a const;
　　5. Which of the following statements describe the use of the keyword stati

[1] [2]  下一页

　
• 上一篇：大唐电信
　

《Delphi笔试题目》相关文章

• Delphi笔试题目
• › Delphi程序员笔试题
• › Delphi程序员笔试题目
• › Delphi笔试题目
• 在百度中搜索相关文章：Delphi笔试题目
• 在谷歌中搜索相关文章：Delphi笔试题目
• 在soso中搜索相关文章：Delphi笔试题目
• 在搜狗中搜索相关文章：Delphi笔试题目